Chair Reupholstery Tutorial

OK, so here’s a tutorial on how I reupholstered my office chair. 🙂

First you need to get rid of the old upholstery. I have no pictures of that, sadly, but that’s a different story with each chair anyway. Start by turning the piece around and see how the fabric is attached. The most usual options are either staples or tacks, which are short nails with a wide head. There’s tack pullers and wood staple removers in the stores, but I’ve just used a dull knife to get under the staple or tack and lift it up a bit, and then removed it with pliers.

Make sure to remove the fabric without ripping it (opening the seams is fine), because it’s easiest to use that as a template for the new fabric. I’ve removed all of the padding, although if that’s in good shape, it’s fine to just change the cover fabric with perhaps a new layer of batting to plump it up a bit.

IMG_9052

Here’s my chair with the new foam padding in place. Most vendors will cut the pieces for you, so I traced the shape of the cushions to a paper and took those to the store. I attached with super glue. I find that spray glue doesn’t work as well as the regular stuff, but YMMV.

IMG_9058

Top off with batting (I used polyester) and cut it to shape.

IMG_9060

Here I used the old cover to measure the new fabric and to mark and cut the handle spots. Just remember to leave enough extra on the sides – it’s going to be much easier to work with! 🙂

Now there’s gonna be a ton of pics to show you how to attach the fabric. Please click on them to make them bigger…

So here we go! Any questions? I’ll be happy to help if I can! 🙂

Just as a disclaimer, if you have real antique furniture to upholster or want to get a gorgeous finish with expensive fabric, I strongly recommend you seek out a professional for the job. I’m nowhere near a pro! I’ve pretty much just learned by reverse engineering the furniture I’ve taken apart to reupholster, seeing how it was done and imitating that. I don’t know if this is the correct way to reupholster things, but I’ve done a few regularly used pieces over the years and they seem to be holding up well, and look nice enough for my own use! 🙂

Advertisements

Office Chair Makeover

IMG_3013

The Before…

IMG_9148

…and the After!

I think it’s from the 50s or 60s. The shape of the chair was around for many decades, I think, but the back rest and seat are a sandwich construction of a wood frame and plywood covers, and somehow that and the metal bits just suggest that era to me. Honestly though, I have no idea. Do share if you have some knowledge of this type of chairs! 🙂

At first I thought to use either a green or grey fabric, but the green fabric is a bit thin and the grey seemed dull when I’d looked at it for a while. I had some durable white canvas left over from the sofa project and figured I’ll just use that for now. I think I’ll sew a slipcover from the green – that way it’s easier to replace if it’s too thin to handle the use.

Here’s a tutorial on how I upholstered this chair! 🙂 Hope you like it!